Easy repair HTC One 802d supported

RIFF JTAG – Easy repair HTC One 802d supported
Repairing bricked HTC One802 Dual (PN0771000) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 2.24.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID may be re-flashed too. In this case after resurrection the phone will have Model ID = ‘PN0771000’.
To resurrect HTC One802 Dual (PN0771000):

•  Solder JTAG cable to HTC One802 Dual (PN0771000) JTAG pads;
  
•  Insert USB Data cable into board and PC;
  
•  Make sure HTC One802 Dual (PN0771000) is selected in the list of models;
  
•  If you use battery, press Power On key;
  
•  Click Resurrect button;
  
•  Wait till software signals a successful operation completion;
  
•  Disconnect power supply, de-solder JTAG wires;
  

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:

•  Disconnect PC cable;
  
•  Insert battery;
  
•  Hold ‘Volume Down’ key and press ‘Power ON’ button.
  

.