RIFF JTAG – Easy repair Huawei Ascend W1-U00 supported

RIFF JTAG – Easy repair Huawei Ascend W1-U00 supported
Repairing bricked Huawei W1-U00 is easy with the RIFF Box.
To resurrect Huawei W1-U00:

•  Solder JTAG cable to Huawei W1-U00 JTAG pads;
  
•  Connect Huawei W1-U00 tablet’s charger for power;
  
•  Make sure Huawei W1-U00 is selected in the list of models;
  
•  Click Resurrect button;
  
•  Wait till software signals a successful operation completion;
  
•  De-solder JTAG wires;
  

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:

•  Disconnect PC cable;
  
•  Copy ‘dload’ folder from firmware update package to SD card root;
  
•  Insert SD card into the SD slot;
  
•  Insert battery;
  
•  Hold both ‘Volume Down’ and ‘Volume up’ keys and press Power-On.
  

.