requirements:
5310 usb cable
Symbian_ROM_Flashing_Tool_v1.50 flasher http://www.ziddu.com/download/563436...v1.50.rar.html
samsung usb driver (can be downloaded in ust/z3x support site
firmware:
http://rapidshare.com/files/27777753...ates.part1.exe
http://rs38.rapidshare.com/files/277...ates.part2.rar
procedure:
1) Hold down the following keys: Volume Up (Top left side) and hold (top right side) in order to boot mode
2) Keep holding those keys and now hold the power key until you see a blue screen with some text.
3) Launch the Symbian ROM Flasher tool and select the flash files.
4) Connect the phone via USB and the soft should say ready in the top right. install the samsung usb drivers
5) Press Download Start and let it run, will take about 4-5 min
6) When the phone reboots and shows "Samsung I8910 HD", disconnect the USB cable and you are done!
wrong boot mode, it will appear like this one
proper boot mode and you can see like this one
select the 3 fw (code,csc and modem file)...download start button will be highlighted..press it
flashing process
during flashing procedure, you can see this thing on your phone
flashing complete
the phone will reboot and make smile
credits goes to original author idol professor linux
5310 usb cable
Symbian_ROM_Flashing_Tool_v1.50 flasher http://www.ziddu.com/download/563436...v1.50.rar.html
samsung usb driver (can be downloaded in ust/z3x support site
firmware:
http://rapidshare.com/files/27777753...ates.part1.exe
http://rs38.rapidshare.com/files/277...ates.part2.rar
procedure:
1) Hold down the following keys: Volume Up (Top left side) and hold (top right side) in order to boot mode
2) Keep holding those keys and now hold the power key until you see a blue screen with some text.
3) Launch the Symbian ROM Flasher tool and select the flash files.
4) Connect the phone via USB and the soft should say ready in the top right. install the samsung usb drivers
5) Press Download Start and let it run, will take about 4-5 min
6) When the phone reboots and shows "Samsung I8910 HD", disconnect the USB cable and you are done!
wrong boot mode, it will appear like this one
proper boot mode and you can see like this one
select the 3 fw (code,csc and modem file)...download start button will be highlighted..press it
flashing process
during flashing procedure, you can see this thing on your phone
flashing complete
the phone will reboot and make smile
credits goes to original author idol professor linux