Samsung GT-S6810P Galaxy Fame WORLD FIRST Boot repair support ! ! !

07.02.2013 RIFF JTAG – Samsung GT-S6810P Galaxy Fame WORLD FIRST Boot repair support ! ! !

Repairing bricked Samsung S6810P is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on, so no
need to press any power-on buttons on the phone keypad.

To resurrect Samsung S6810P:

• Solder JTAG cable to Samsung S6810P JTAG pads;
  
• Insert USB Data cable into board and PC;
  
• Make sure Samsung S6810P is selected in the list of models;
  
• Click Resurrect button;
  
• Wait till software signals a successful operation completion;
  
• Disconnect power supply, de-solder JTAG wires;
  

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

To enter download mode:

• Disconnect PC cable;
  
• Insert battery;
  
• Hold ‘Volume Down’ and ‘OK’ keys and press Power-On. And after you
  see the warning message press ‘Volume Up’ key to enter Download Mode.
  

.