Medusa Box Flasher v1.1.0 - Xperia Ray, Xperia Mini Pro repair added!

Medusa Box Flasher v1.1.0 is out!

Added world's first Phone Repair, Boot Repair and Security Recalculation via USB for Sony Ericsson Xperia Ray
and Xperia Mini Pro (no need to solder JTAG wires - only small TP, no credits required either).


Medusa Box Flasher v1.1.0 Release Notes:

- Added support for the following models:

• Sony Ericsson ST18a (Xperia Ray) - added Phone Repair
  (Dead Boot Repair + Security Recalculation), Read Full Flash - all via USB.
  
• Sony Ericsson ST18i (Xperia Ray) - added Phone Repair
  (Dead Boot Repair + Security Recalculation), Read Full Flash - all via USB.
  
• Sony Ericsson SO-03C (Xperia Ray) - added Phone Repair
  (Dead Boot Repair + Security Recalculation), Read Full Flash - all via USB.
  
• Sony Ericsson Sk17a (Xperia Mini Pro) - added Phone Repair
  (Dead Boot Repair + Security Recalculation), Read Full Flash - all via USB.
  
• Sony Ericsson SK17i (Xperia Mini Pro) - added Phone Repair
  (Dead Boot Repair + Security Recalculation), Read Full Flash - all via USB.
  

To repair ST18a/ST18i/SO-03C/SK17a/SK17i you need to perform following operations:

1. Press "Repair Phone" button.
   
2. Reconnect the battery.
   
3. Attach Testpoint and connect phone with Micro USB cable directly to the motherboard's USB port
   (avoid USB hub connection).
   
4. Install necessary drivers (located at "C:\Program Files\GsmServer\Medusa\Driver\USBFlash" folder).
   
5. Follow software instructions (prompts).
   

When Repair will be done, you'll need to re-flash the phone with any firmware from free Medusa Box support area
of Boot-Loader v2.0 portal.

Note that after Phone Repair procedure, your phone will have "00000000000000" IMEI number and will be locked.
To unlock or repair IMEI, you can use Octopus Suite.

Download Medusa Box Flasher v1.1.0