ORT - JTAG UPDATE
[08 JUN 2012]
Description :
Release Notes:
SDIN2C2-4G is supported
Enabled HTC MSM8X55 / MSM8X60 Models IMEI , CID , SN change for ORT Hardware
How to Change IMEI / CID / SN :
Right After Halting / Scan
Go to Unlocker Tab and IMEI / SN Windows Will be activated
Change and Click to confirm
MSM8X55 USB Communication Supported
Over USB eMMC Support Added
Over USB SD Card Support Added
ORT Qualcomm USB Drivers Released
HTC MSM8X55 Phones are supported with USB for
Read Flash
Write Flash
Repair Dead Boot
Unlocking
CID Change
IMEI Change
SN Change
Test Point Usage :
ORT Team News and Blog :
ORT-JTAG - The Real JTAG'gers
[08 JUN 2012]
Description :
- ORT Plus V1.78 Released
Release Notes:
- Samsung SHV-E160K [ APQ8060 ] Halt Method added
- Support Samsung GT-P6200
- Hynix eMMC Supported
- Flash ID : 0x594E495890014A48
- Sub Flash ID : 0x874B6E18205F001E
How to Change IMEI / CID / SN :
Test Point Usage :
- if Qualcomm Drivers are not found
- Power Off the Phone
- Connect TP to GND and Power ON the phone
- Remove TP after Qualcomm Drivers are installed
- Drivers Are located " C:\Program Files\ORT\drivers\ORTQualcommUSB "
- ORT Team Will release test points for the supported models
eMMC Test Point is used to trick the cpu that there is no boot in the eMMCWhat's News in the Forum :
and the cpu run the boot inside the rom and enumerate a qualcomm usb device on the pc's usb.
When the loader runs,pc will detect the phone as "ORT Qualcomm USB" device.
ORT Team News and Blog :
ORT-JTAG - The Real JTAG'gers